23 Technical data
378
23.12 Case
Site altitude maximum 2000 m above sea level
Case type Plastic front frame with metal case barrel (for indoor use only)
Materials Plastic front panel UL 94 V0
Case barrel from zinc-plated steel sheet
Dimensions of the front 96 mm × 96 mm
Dimensions of the panel cut-out 92 mm × 92 mm
Tolerance = +0.8 mm
Depth behind panel
without Ci-conductivity sensor 130.9 mm
with Ci-conductivity sensor 283.3 mm (including maneuvering space for sensor cable)
Panel thickness Max. 5 mm
Minimum distance to other operating
equipment
from edge of the panel cut-out
horizontal 35 mm, vertical 80 mm
Ambient temperature -5 to +50 °C
Storage temperature -30 to +70 °C
Resistance to climatic conditions Relative humidity < 85% annual average, no condensation
Operating position Any (with due consideration for the viewing angle of the
screen)
Protection type According to DIN EN 60529
Case front in panel insertion IP66
Metal case barrel IP20
Weight
(fully fitted)
approx. 1000 g
To Next Page
Loading...
