7 Startup
74
These sensor values are subject to distortion caused by outside factors.
Display of uncompensated values is used primarily for diagnostic purposes.
The compensated values are used for the actual measurement of analysis
variables.
The following example considers analysis inputs in the form of a conductivity
measurement input and a pH measurement input.
The device calculates the (compensated) values of the process variable from
the (uncompensated) raw measurement data.
Sample screen:
IN 7 measures
conductivity
IN 8 measures pH value
IN 9 to 10 are available
only on the
JUMO AQUIS touch S.
To Next Page
Loading...
