8 Operation
90
8.2.2 User levels
A user level consists of a user-defined list of parameters and configuration set-
tings. Up to 16 such user levels can be set up. You need the JUMO PC setup
program to configure the user level.
⇨ Chapter 22.8.6 "User levels", page 324
User levels can be opened from the device menu only if they have been config-
ured beforehand with the aid of the PC setup program. If this has not been done,
there is no user level in the device menu.
Opening a user level provides easy and uncomplicated access to the selected
parameters and settings. These can be edited from here. The entry dialog is
opened by tapping the display field for a desired data point.
View of a user level (example)
To make an en-
try,
tap the display
NOTE!
Changing the date/time settings and the configuration data that are relevant for
recording of measurement data initiates a restart of measurement data record-
ing by the data monitor or recording function. This is also the case if the change
is made from a user level. The restart terminates the current recording of mea-
surement data. In the case of the "Data monitor" function, the content of the
screen is deleted.
To Next Page
Loading...
