EasyManua.ls Logo

Jung DWPMK360WW - Troubleshooting

Jung DWPMK360WW
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Minimum switching current AC 100 mA
Connected load at AC 230 V~ and 35 °C
Incandescent lamps 2300 W
HV halogen lamps 2000 W
Electronic transformers 1500 W
Inductive transformers 1000 VA
HV-LED lamps typ. 400 W
Compact fluorescent lamps typ. 400 W
Fluorescent lamps, uncompensated 920 VA
Capacitive load 690 VA (560 μF)
Connected load at AC 110 V~ and 35 °C
Incandescent lamps 1150 W
HV halogen lamps 1000 W
Electronic transformers 750 W
Inductive transformers 500 VA
HV-LED lamps typ. 200 W
Compact fluorescent lamps typ. 200 W
Fluorescent lamps, uncompensated 460 VA
Capacitive load 345 VA (560 μF)
Connection
Single stranded 1.0 ... 2.5 mm²
finely stranded with tin-plated conductor
ends
0.75 ... 1.5 mm²
Number of extension units
Push-button unlimited
2-wire unlimited
Total length of extension device cable Max. 100 m
Total length power cable Max. 100 m
IR remote control
Battery type 1×lithium CR 2025
8 Troubleshooting
Device does not switch on
Cause 1: The ambient brightness is greater than the set brightness value.
Set brightness value.
Cause 2: Device does not detect any motions.
Motion and presence detector
23 / 25
82593233 25.09.2023
J0082593233