• Carefully push the forks into the fork shoes (241) of the work platform.
Raise the work platform securely:
WARNING!
Unsecured work platforms can be hazardous
The work platform must be connected both physically and electrically to the truck at
all times during operation.
u
The physical lock of the work platform must engage with the stop on the load
handler.
u
The work platform must be connected electrically to the truck at all times during
operation.
•
Raise the work platform slightly until it is clear of the ground.
The mechanical lock (243) of the work platform must engage with the stop on
the load handler (244). The work platform is prevented from falling. The "work
platform raised securely" symbol appears in the driver's display. The raised and
locked work platform is monitored by non-contact sensors.
• Slowly retract the forks and work platform back to the home position.
• Attach the connecting cable (238) of the work platform to the truck.
Z
When the truck and work platform have been connected electrically, the truck can
only travel and/or carry out hydraulic operations with the two-hand control system
(handles (237) grabbed) and the gate closed (239). If the truck is not connected
electrically to the work platform, travel and hydraulic operations are disabled when
the work platform has been raised.
The work platform has been raised correctly with the standard attachment.
Z
The "Attachment traverse" and / or "Fork carriage rotate" functions are inhibited
when the work platform is raised and electrically connected.
303
04.19 en-GB
To Next Page
Loading...
Need help?
General
