To Next Page

To Previous Page

0401.GB

C 2

2 First commissioning

The truck must only be operated on battery current. Rectified alternate current will da-

mage the electronics. Cables connected to the battery (towing cable) must be less

than 6 meters in length.

It is prohibited to hoist loads when the truck is operated via a towing cable with an

external battery.

In order to prepare the truck for work following delivery or transportation, the following

operations must be performed:

– Check whether the equipment is complete and in perfect condition.

– If required, mount the battery, make sure not to damage the battery cable

(see chapter D).

At trucks with an optionally built-in battery charger, adjust the characteristics (loading

cam) (see chapter D).

– Load the battery (see chapter D).

– If required, check whether the settings of the combined instrument correspond to

the battery (see chapter D).

– Commission the truck as prescribed

(see chapter E).

If the truck is parked for longer periods, the running surfaces of the wheels may be

flattened. However, this flattening will disappear quickly when the truck is being

driven.