0401.GB
F 4
4 Maintenance checklist.
Maintenance intervals
Standard = t WMMM
Cold-storage depot = k 13612
Chassis/
Design:
1.1 Check all load bearing elements for damage t
1.2 Check all bolted connections t
Drive unit: 2.1 Check the transmission for noises and leakage t
2.2 Check the transmission oil level t
2.3 Change the gear oil kt
Wheels: 3.1 Check for wear and damage t
3.2 Check seating and attachment kt
Steering: 4.1 Check the steering clearance t
Brake
system:
5.1 Check for correct function and adjustment kt
5.2 Check the return spring for repositioning function and
damage
t
5.3 Check the brake linings for wear t
5.4 Check the brake linkage; adjust and grease,
if necessary
kt
Hoist frame: 6.1 Visual check of rollers, slide pieces and stops kt
6.2 Check fork tines and fork carrier for wear and damage kt
6.3 Check secure attachment of hoist frame t
6.4 Check lift chains and chain guide for wear, adjust and
grease them.
t
6.5 Check the lateral clearance of the mast profiles and
whether they are parallel to each other
t
6.6 Check safety devices for proper attachment
and damages
kt
Lifting device: 7.1 Check function, wear and tear and adjustment t
7.2 Visual check of rollers, slide pieces and stops kt
7.3 Check fork tines and fork carrier for wear and damage kt
Hydr. system: 8.1 Check function kt
8.2 Check all connections for leakage and damage kt
8.3 Check hydraulic cylinders for leakage, damage and
secure attachment
kt
8.4 Check the oil level kt
8.5 Change hydraulic oil kt
8.6 Change filter t
8.7 Check the pressure relief valves for correct functioning kt
0401.GB
F 4
4 Maintenance checklist.
Maintenance intervals
Standard = t WMMM
Cold-storage depot = k 13612
Chassis/
Design:
1.1 Check all load bearing elements for damage t
1.2 Check all bolted connections t
Drive unit: 2.1 Check the transmission for noises and leakage t
2.2 Check the transmission oil level t
2.3 Change the gear oil kt
Wheels: 3.1 Check for wear and damage t
3.2 Check seating and attachment kt
Steering: 4.1 Check the steering clearance t
Brake
system:
5.1 Check for correct function and adjustment kt
5.2 Check the return spring for repositioning function and
damage
t
5.3 Check the brake linings for wear t
5.4 Check the brake linkage; adjust and grease,
if necessary
kt
Hoist frame: 6.1 Visual check of rollers, slide pieces and stops kt
6.2 Check fork tines and fork carrier for wear and damage kt
6.3 Check secure attachment of hoist frame t
6.4 Check lift chains and chain guide for wear, adjust and
grease them.
t
6.5 Check the lateral clearance of the mast profiles and
whether they are parallel to each other
t
6.6 Check safety devices for proper attachment
and damages
kt
Lifting device: 7.1 Check function, wear and tear and adjustment t
7.2 Visual check of rollers, slide pieces and stops kt
7.3 Check fork tines and fork carrier for wear and damage kt
Hydr. system: 8.1 Check function kt
8.2 Check all connections for leakage and damage kt
8.3 Check hydraulic cylinders for leakage, damage and
secure attachment
kt
8.4 Check the oil level kt
8.5 Change hydraulic oil kt
8.6 Change filter t
8.7 Check the pressure relief valves for correct functioning kt
To Next Page
Loading...
Need help?
General
