Jungheinrich EJC B14 User Manual

03.11 EN
48
4.2.3 Travel
CAUTION!
XDo not drive the truck unless the panels are closed and properly locked.
XWhen travelling through swing doors etc. make sure that the doors do not activate
the collision safety button.
Requirements
– Start up the truck, (see "Starting up the truck" on page 42)
Procedure
• Set the tiller (7) to the travel range (F) and press the travel switch (3) in the desired
direction (fwd. or rev.).
• Control the travel speed with the travel switch (3).
Z When the travel switch is released it automatically returns to its original position.
The brakes are released and the truck moves in the selected direction.
Z Preventing the truck from “rolling downhill”:
If the truck rolls backwards on an incline the controller detects the situation and the
brake applies automatically after a short movement.
0
R
R
V
B
F
B
V
8
3
7
5
03.11 EN
48
4.2.3 Travel
CAUTION!
XDo not drive the truck unless the panels are closed and properly locked.
XWhen travelling through swing doors etc. make sure that the doors do not activate
the collision safety button.
Requirements
– Start up the truck, (see "Starting up the truck" on page 42)
Procedure
• Set the tiller (7) to the travel range (F) and press the travel switch (3) in the desired
direction (fwd. or rev.).
• Control the travel speed with the travel switch (3).
Z When the travel switch is released it automatically returns to its original position.
The brakes are released and the truck moves in the selected direction.
Z Preventing the truck from “rolling downhill”:
If the truck rolls backwards on an incline the controller detects the situation and the
brake applies automatically after a short movement.
0
R
R
V
B
F
B
V
8
3
7
5

Jungheinrich EJC B14 Specifications

General

Brand	Jungheinrich
Model	EJC B14
Category	Trucks
Language	English