Jungheinrich EJC B14 User Manual

49
03.11 EN
4.2.4 Slow travel
CAUTION!
The driver must be particularly careful when applying the “slow travel” button (2).
The brake is only activated when the "slow travel" button is released and the tiller has
been folded.
XIn hazardous situations brake by immediately releasing the slow travel button (2)
and folding the tiller (7).
XDuring "slow travel" you can only brake by inversion braking (travel switch (3)).
The truck can be operated with an upright tiller (7) (e.g. in congested areas / elevator).
Activating slow travel
Procedure
• Press the slow travel switch (2).
• Set the travel switch (3) to the required direction (fwd. or rev.).
The brake is released. The truck travels at slow speed.
Switching off slow travel
Procedure
WARNING!
Accidental acceleration can cause accidents
When you apply the slow travel button in the travel zone "F" and simultaneously press
the travel switch (3), the truck continues to travel at a faster speed.
• Release the slow travel button (2).
In zone "B" the truck coasts.
• Release the travel switch (3).
Slow travel ends and the brake applies. The truck can now operate again at normal
speed.
49
03.11 EN
4.2.4 Slow travel
CAUTION!
The driver must be particularly careful when applying the “slow travel” button (2).
The brake is only activated when the "slow travel" button is released and the tiller has
been folded.
XIn hazardous situations brake by immediately releasing the slow travel button (2)
and folding the tiller (7).
XDuring "slow travel" you can only brake by inversion braking (travel switch (3)).
The truck can be operated with an upright tiller (7) (e.g. in congested areas / elevator).
Activating slow travel
Procedure
• Press the slow travel switch (2).
• Set the travel switch (3) to the required direction (fwd. or rev.).
The brake is released. The truck travels at slow speed.
Switching off slow travel
Procedure
WARNING!
Accidental acceleration can cause accidents
When you apply the slow travel button in the travel zone "F" and simultaneously press
the travel switch (3), the truck continues to travel at a faster speed.
• Release the slow travel button (2).
In zone "B" the truck coasts.
• Release the travel switch (3).
Slow travel ends and the brake applies. The truck can now operate again at normal
speed.

Jungheinrich EJC B14 Specifications

General

Brand	Jungheinrich
Model	EJC B14
Category	Trucks
Language	English