03.11 EN
50
4.2.5 Steering
Procedure
• Move the tiller (7) to the left or right.
Steers the truck in the required direction.
Z Optional: Electric steering.
4.2.6 Brakes
The brake pattern of the truck depends largely on the travel route conditions. The
driver must take this into account.
The truck can brake in three different ways:
– With the service brake (tiller)
– By inversion braking (travel switch)
– By regenerative braking (coasting)
NOTE
XIn normal conditions you should only use regenerative braking and plugging, as
these forms of braking reduce wear and save energy (energy recovery).
0
R
R
V
B
F
B
V
7
8
3
5
03.11 EN
50
4.2.5 Steering
Procedure
• Move the tiller (7) to the left or right.
Steers the truck in the required direction.
Z Optional: Electric steering.
4.2.6 Brakes
The brake pattern of the truck depends largely on the travel route conditions. The
driver must take this into account.
The truck can brake in three different ways:
– With the service brake (tiller)
– By inversion braking (travel switch)
– By regenerative braking (coasting)
NOTE
XIn normal conditions you should only use regenerative braking and plugging, as
these forms of braking reduce wear and save energy (energy recovery).
0
R
R
V
B
F
B
V
7
8
3
5