65
03.11 EN
F Industrial Truck Maintenance
1 Operational Safety and Environmental Protection
The checks and servicing operations contained in this chapter must be performed in
accordance with the intervals as indicated in the servicing checklists.
WARNING!
Risk of accidents and damage to components
All modifications to the forklift truck assemblies, in particular the safety mechanisms,
are prohibited. The operating speeds of the truck must not be increased under any
circumstances.
NOTE
Only original spare parts have been certified by our quality assurance department. To
ensure safe and reliable operation of the truck, use only the manufacturer's spare
parts.
For safety reasons, only components which have been specially agreed by the
manufacturer for this truck may be installed near the computer, controllers and wire
guidance sensors (antennae). These components (computers, controllers, wire
guidance sensors (antennae)) must therefore not be replaced either by similar
components from other trucks of the same series.
2 Maintenance Safety Regulations
Maintenance personnel
The truck should only be serviced and repaired by the manufacturer's specialist
customer service personnel who have been trained to do this. We therefore
recommend that you enter into a maintenance contract with the manufacturer’s local
sales office.
65
03.11 EN
F Industrial Truck Maintenance
1 Operational Safety and Environmental Protection
The checks and servicing operations contained in this chapter must be performed in
accordance with the intervals as indicated in the servicing checklists.
WARNING!
Risk of accidents and damage to components
All modifications to the forklift truck assemblies, in particular the safety mechanisms,
are prohibited. The operating speeds of the truck must not be increased under any
circumstances.
NOTE
Only original spare parts have been certified by our quality assurance department. To
ensure safe and reliable operation of the truck, use only the manufacturer's spare
parts.
For safety reasons, only components which have been specially agreed by the
manufacturer for this truck may be installed near the computer, controllers and wire
guidance sensors (antennae). These components (computers, controllers, wire
guidance sensors (antennae)) must therefore not be replaced either by similar
components from other trucks of the same series.
2 Maintenance Safety Regulations
Maintenance personnel
The truck should only be serviced and repaired by the manufacturer's specialist
customer service personnel who have been trained to do this. We therefore
recommend that you enter into a maintenance contract with the manufacturer’s local
sales office.
To Next Page
Loading...
Need help?
General
