To Next Page

To Previous Page

F 4

0708.GB

4 Hydraulic oil level

5 Fuels, coolants and lubricants

Handling consumption-type material: Consumption-type material must always be

handled properly. Manufacturer’s instructions are to be observed.

Improper handling is injurious to health, life and environment. Consumption-type

materials must be stored in adequate containers. They might be inflammable and,

therefore, must not come into contact with hot components or open fire.

When filling in consumption-type materials, use clean containers only. Mixing

consumption-type materials of different grades or qualities is prohibited, except if

mixing is expressly prescribed in these operating instructions.

Avoid spilling. Spilt liquid must be removed immediately using a suitable binding

agent and the mixture of consumption-type material and binding agent is to be

disposed of according to the regulations.

Code Designation Used for:

A H-LP 46, DIN 51524 Hydraulic system

2,0 l

Filler plug for

hydraulic oil

1,4 l