05.10 EN
160
6.7.2 DFG engine maintenance
NOTE
Used oil contaminates the environment
XDispose of used oil and used engine oil filters in accordance with environmental
regulations.
CAUTION!
Risk of scalding through hot oil.
XWear appropriate safety gloves when replacing the oil and oil filter.
NOTE
When the engine is cold the engine oil can be viscous.
XOnly change the engine oil when the engine is at operating temperature and the
industrial truck is horizontal. Always replace the engine oil and engine oil filter
together.
Checking the engine oil level
Requirements
– Park the truck on a level surface (see
"Parking the truck securely" on page 76)
Procedure
• Remove the dipstick (204).
• Wipe the dipstick with a lint-free cloth and put
in back fully into the port.
• Remove the dipstick again and check that
the oil level is between the MIN and MAX
markings.
• If the engine oil level is below the bottom MIN marking, add engine oil as per the
consumables list ((see "Consumables" on page 149)).
The engine oil has now been checked.
MIN
MAX
204
To Next Page
Loading...
Need help?
General
