08.11 EN
166
7.6.8 TFG engine maintenance
NOTE
Used oil contaminates the environment
XDispose of used oil and used engine oil filters in accordance with environmental
regulations.
CAUTION!
Risk of scalding through hot oil.
XWear appropriate safety gloves when replacing the oil and oil filter.
NOTE
When the engine is cold the engine oil can be viscous.
XOnly change the engine oil when the engine is at operating temperature and the
industrial truck is horizontal. Always replace the engine oil and engine oil filter
together.
Checking the engine oil level
Requirements
– Park the truck on a level surface (see
"Parking the truck securely" on page 74)
Procedure
• Remove the dipstick (163).
• Wipe the dipstick with a lint-free cloth
and put in back fully into the port.
• Remove the dipstick again and check
that the oil level is between the MIN and
MAX markings.
• If the engine oil level is below the bottom
MIN marking, add engine oil as per the
consumables list ((see "Consumables"
on page 151)).
The engine oil has now been checked.
163
To Next Page
Loading...
Need help?
General
