Juniper NetScreen-50 - The Rear Panel

The Rear Panel
NetScreen-50 5
(WKHUQHW,QWHUIDFHV
Each Ethernet port is a 10/100 auto-sensing interface. Each port has a pair of LEDs: the
left LED indicates network traffic activity and the right LED indicates if the link is up
(the port is connected to an active device).
7+(5($53$1(/
The rear panel of the NetScreen-50 device contains the power outlet and ON/OFF switch.
You can order the NetScreen-50 device with either an AC or DC power supply.
Power Outlet
ON/OFF Switch