Juniper PTX Series - Page 172

user@host> show chassis routing-engine
Routing Engine status:
Slot 0:
Current state Master
Election priority Master (default)
Temperature 60 degrees C / 140 degrees F
CPU temperature 73 degrees C / 163 degrees F
DRAM 17152 MB
Memory utilization 11 percent
CPU utilization:
User 0 percent
Background 0 percent
Kernel 4 percent
Interrupt 1 percent
Idle 94 percent
Model RE-DUO-2600
Serial ID P737A-002231
Start time 2011-12-07 09:54:43 PST
Uptime 3 hours, 9 minutes, 55 seconds
Last reboot reason Router rebooted after a normal shutdown.
Load averages: 1 minute 5 minute 15 minute
0.04 0.04 0.01
Routing Engine status:
Slot 1:
Current state Backup
Election priority Backup (default)
Temperature 50 degrees C / 122 degrees F
CPU temperature 62 degrees C / 143 degrees F
DRAM 17152 MB
Memory utilization 11 percent
CPU utilization:
User 0 percent
Background 0 percent
Kernel 0 percent
Interrupt 0 percent
Idle 99 percent
Model RE-DUO-2600
Serial ID P737A-002438
Start time 2011-12-07 09:53:16 PST
Uptime 3 hours, 11 minutes, 23 seconds
Last reboot reason Router rebooted after a normal shutdown.
3. Use the show chassis alarms command to display Routing Engine alarms.
Related
Documentation
PTX5000 Host Subsystem Description on page 35•
• PTX5000 Routing Engine Description on page 44
• PTX5000 Routing Engine LEDs on page 47
• PTX5000 Craft Interface LEDs on page 28
• Maintaining the PTX5000 Routing Engines on page 114
• Replacing a PTX5000 C2600 Routing Engine on page 203
Copyright © 2012, Juniper Networks, Inc.146
PTX5000 Packet Transport Switch Hardware Guide