Juniper PTX10008 - Software Features

Software Features
•
Compliance with ITU G.709 and G.798
•
Transport interface and state model (GR-1093)
•
Performance monitoring features such as alarms, threshold-crossing alarms, OTU/ODU error seconds,
and FEC and bit error rate (BER) statistics
•
SNMP management of the MIC based on RFC 3591, Managed Objects for the Optical Interface Type,
including the following:
•
Black Link MIB–jnx-bl.mib
•
IFOTN MIB–jnx-ifotn.mib
•
Optics MIB–jnx-optics.mib
•
FRU MIB–jnx-fru.mib
•
User-configurable optics options:
•
Modulation format: 16QAM, 8QAM, QPSK
•
FEC mode (15% SDFEC or 25% SDFEC)
•
Differential and non-differential encoding modes
•
Transmit (TX) laser enable and disable
•
TX output power
•
Wavelength
•
Threshold crossing alarms (TCAs)
•
IEEE 802.1ag OAM
•
IEEE 802.3ah OAM
•
IFINFO/IFMON
•
IEEE 802.3ad link aggregation
•
Flexible Ethernet services encapsulation
•
Flexible VLAN tagging
•
Source address MAC accounting per logical interface
•
Source address MAC filter per port
•
Source address MAC filter per logical interface
•
Destination address MAC filter per port
•
Up to 8000 logical interfaces shared across all ports on a single Packet Forwarding Engine
106