Figure 62 on page 140 shows the location of QSFP28 ports and port groups for the QFX10000-60S-6Q.
Table 44 on page 140 shows the available combinations for the ports.
Figure 62: QFX10000-60S-6Q Port Groups
Table 44: QFX10000-60S-6Q Port Mapping
100-Gigabit Ethernet
Disables
100-Gigabit
Ethernet
40-Gigabit
Ethernet
4X10-Gigabit
Channelized
Port Group
4X10-Gigabit
EthernetPort Number
61, 62✓✓✓✓60
––✓✓61
––✓✓62
––✓✓✓63
63, 65✓✓✓64
––✓✓65
Channelization of 40-Gigabit Ethernet Ports
Channelization from a 40-Gigabit Ethernet port into 4 independent 10-Gigabit Ethernet ports is supported
on the QSFP28 and QSFP+ ports. Channelization to 50-Gbps or 25-Gbps speed is not supported on the
100-Gigabit Ethernet QSFP28 port. All ports in the port group are channelized when port 60 or port 63
are channelized. Ports cannot be channelized individually.
To channelize a 40-Gbps port to 4 independent 10-Gbps ports, use the set chassis fpc fpc-slot-number pic
pic-slot-number port port-number channel-speed speed command. For example, to channelize ports 60
through 62 for a line card in slot 6:
[edit chassis fpc 6 pic 1]
140
To Next Page
Loading...
