PTX10016 Chassis Physical Specifications
The PTX10016 modular chassis is a rigid sheet-metal structure that houses the field-replaceable units
(FRUs). You can mount up to two PTX10016 chassis in a standard 19-in. 4-post rack (42 U) rack, provided
the rack can handle the combined weight and there is adequate power and cooling.Table 53 on page 161
summarizes the physical specifications of the chassis. See Figure 73 on page 163.
Table 53: PTX10016 Physical Specifications
DepthWidthHeightWeightDescription
35 in. (88.9 cm)
42.4 in. (107.7 cm)
with EMI door
17.4 in. (44.2 cm)
NOTE: The outer
edges of the chassis
flange extend the
width to 19 in.
(48.3 cm).
36.6 in. (92.96 cm)220 lb (99.79 kg)Chassis, spare
35 in. (88.9 cm)17.4 in. (44.2 cm)
NOTE: The outer
edges of the chassis
flange extend the
width to 19 in.
(48.3 cm).
36.6 in. (92.96 cm)522 lb (236.78 kg)Chassis base AC
configuration
35 in. (88.9 cm)17.4 in. (44.2 cm)
NOTE: The outer
edges of the chassis
flange extend the
width to 19 in.
(48.3 cm).
36.6 in. (92.96 cm)596 lb (270.34 kg)Chassis redundant
AC configuration
35 in. (88.9 cm)17.4 in. (44.2 cm)
NOTE: The outer
edges of the chassis
flange extend the
width to 19 in.
(48.3 cm).
36.6 in. (92.96 cm)591 lb (268.07 kg)Chassis redundant
DC configuration
20.54 in. (52.2 cm)17.2 in. (43.7 cm)1.89 in. (4.8 cm)27 lb (12.2 kg)PTX10K-LC1101
Line Card
161
To Next Page
Loading...
