Figure 131: Removing a PTX10016 Fan Tray Controller
4. Place the fan tray controller in an electrostatic bag or on an antistatic mat.
RELATED DOCUMENTATION
PTX10008 Cooling System and Airflow | 46
PTX10016 Cooling System
PTX10000 Field-Replaceable Units | 40
Removing and Installing PTX10000 Power System
Components
IN THIS SECTION
How to Remove a JNP10K-PWR-AC Power Supply | 270
How to Install a JNP10K-PWR-AC Power Supply | 274
How to Remove a JNP10K-PWR-AC2 Power Supply | 282
How to Install a JNP10K-PWR-AC2 Power Supply | 285
How to Remove a JNP10K-PWR-DC Power Supply | 292
How to Install a JNP10K-PWR-DC Power Supply | 297
How to Remove a JNP10K-PWR-DC2 Power Supply | 307
How to Install a JNP10K-PWR-DC2 Power Supply | 311
269
To Next Page
Loading...
