Figure 218: Moving the PTX10008 Using a Mechanical Lift
SEE ALSO
Powering Off a PTX10000 | 356
Manually Removing a PTX10008 from a 4-Post Rack
If you cannot use a mechanical lift to remove the router (the preferred method), you can install it manually.
CAUTION: The chassis weighs approximately 145 lb (66 kg) with only the fan tray
controllers installed. Lifting the chassis and mounting it in a rack or cabinet requires at
least three people.
Make sure the chassis is empty (contains only the backplane) before you lift it.
360
To Next Page
Loading...
