Figure 234: Stacking Configuration for Packing the PTX10016 Chassis
To pack a PTX10000 for shipping:
1. Power down the chassis and remove the power cables. See “Powering Off a PTX10000” on page 356.
2. Remove the cables that connect the PTX10000 to all external devices.
3. Remove all line cards and pack them in their original shipping containers. See “Packing a PTX10000 or
Component for Shipping” on page 388.
4. Install covers over blank slots.
Leave components that came installed in the chassis in the chassis, such as the Control Boards or power
supplies.
390
To Next Page
Loading...
