CAUTION: If you are installing the PTX10008 without a mechanical lift, remove all power
supplies, control boards, SIBs, cover panels, and fan trays before attempting to install the
router. Unless you are using a mechanical lift, at least three people are required to perform
the rack installation.
•
Before installing a PTX10008, read the guidelines in “PTX10000 Site Preparation Checklist” on page 149
to verify that the intended site meets the specified power, environmental, and clearance requirements.
•
Before lifting or moving the PTX10008, disconnect all external cables.
•
When raising the PTX10008 into the rack, have two people lift and align the router with the rack while
another person secures the router to the rack. As when lifting any heavy object, lift most of the weight
with your legs rather than your back. Keep your knees bent and your back relatively straight and avoid
twisting your body as you lift. Balance the load evenly and be sure that your footing is solid.
RELATED DOCUMENTATION
Mounting a PTX10008 in a 4-Post Rack Using a Mechanical Lift | 209
Manually Mounting a PTX10008 in a 4-Post Rack | 212
404
To Next Page
Loading...
