EasyManuals Logo

Jupiter 862 User Manual

Jupiter 862
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Subject to technical changes without notice; no responsibility is accepted for the accuracy of this information. 5
3 Position the desired perforated disc F on the axle of the
screw.
IMPORTANT: The notch of the perforated disc must
point downwards and sit over the small raised area in
the housing! See detail
X.
INFO: Both sides of the perforated disc can be used.
4 Screw the sealing ring G clockwise onto the housing
and tighten by hand.
5 Attach the filling hopper B onto the housing.
TIP: It is better not to attach the filling hopper until after
the attachment is fitted to the drive unit.
Mounting/removing the attachment
See operating instructions for the Drive Unit.
Processing ingredients
CAUTION Rotating parts can cause injury!
Never put your hand into the attachment when the mo-
tor is running.
Never insert the food to be processed into the appliance
by hand. Always use the pusher A.
The universal mincer attachment may only be operated
when it is completely assembled and the sealing ring G
is screwed on tight.
Before using for the first time, thoroughly clean all parts
of the attachment (see section
Cleaning).
To operate the drive unit, see the operating instructions
for the Drive Unit.
Insert the ingredients to be processed into the filling
opening of the attachment in portions. Push them down
using the pusher A.
INFO: Excessive pushing does not speed the process up.
Cleaning
NOTE Dishwasher can cause damage!
Attachments are not dishwasher-safe. Only clean the at-
tachments using lukewarm water and washing-up liquid.
Remove the attachment from the drive unit before
cleaning.
Disassemble the universal mincer attachment and clean
it with lukewarm water and washing-up liquid.
Clean the blade and perforated disc separately and al-
low to dry thoroughly.
Rub a little cooking oil or fat onto the blade and per-
forated disc.
Storage
Store the appliance in its original packaging, in a dry, dust-
free and cool place that is out of reach of children.
Accessories for the universal mincer attach-
ment
These accessories can only be used with the universal
mincer attachment 862 200!
Attachment Processing notes
220 000
Special grater attachment ideal
for finely grating hard foods such
as nuts, almonds, hard cheeses,
chocolate, bread rolls, etc.
260 000
Fruit press attachment to make
naturally cloudy juices, as well as
purées from grapes, berries and
apples.
862 250
Accessory set for all your needs;
attachments for making biscuits,
filling sausages and dicing bacon.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jupiter 862 and is the answer not in the manual?

Jupiter 862 Specifications

General IconGeneral
BrandJupiter
Model862
CategoryKitchen Appliances
LanguageEnglish

Related product manuals