EasyManua.ls Logo

Jura 735 - 6 Display messages

Jura 735
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
6 Display messages
6 Display messages
Message Cause/Result Action
‘Fill water tank’ The water tank is empty. You
cannot prepare any products.
T Fill the water tank (see Chapter 3 ‘Daily
operation – Filling the water tank’).
‘Empty coffee
grounds container’
The coffee grounds container
is full. You cannot prepare any
products.
T Empty the coffee grounds container
and the drip tray (see Chapter 3 ‘Daily
operation – Daily maintenance’).
‘Drip tray not fitted’ The drip tray is not inserted
correctly or is not inserted at
all. You cannot prepare any
products.
T Fit the drip tray.
‘Fill bean container’ The bean container is empty.
You cannot prepare any
speciality coffees, but you can
prepare hot water and milk.
T Fill the bean container (see Chapter 1
‘Preparing and using for the first time –
Filling the bean container’).
‘Rinse the milk
system’
The E8 requests a milk
system rinse.
T Perform milk system rinsing (see
Chapter 5 ‘Maintenance – Rinsing the
fine foam frother’).
The filter symbol at
the bottom of the
display lights up red.
The filter cartridge no longer
works.
T Replace the CLARIS Smart filter
cartridge (see Chapter 5 ‘Maintenance –
Inserting/changing the filter’).
‘Clean machine The E8 is prompting you to
clean it.
T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the machine’).
‘Decalcify machine’ The E8 is prompting you to
descale it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine’).
‘Too hot’ The system is too hot to start
a maintenance programme.
T Wait for several minutes until the
system has cooled or prepare a speciality
coffee or hot water.

Related product manuals