Jura D60 - Empty Tray

12
1 Preparing and using for the first time
T Turn the Rotary Switch to change the water hardness set-
ting, e.g. to
25°dH.
T Press the Rotary Switch.
OK appears briefly on the display.
INSERT FILTER
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Open the filter holder.
T Insert the CLARIS Smart filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
OK appears briefly on the display.
OPEN SWITCH, the light segment on the switch lights up.
T Place a receptacle (at least 500 ml) under the fine foam
frother and the coffee spout.
T Turn the switch to them position.
FILTER RINSING, water flows out of the fine foam
frother.
E You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically.
CLOSE SWITCH
T Turn the switch to the °position.
SYSTEM FILLING, the system fills up with water.
EMPTY TRAY