13
1 Preparing and using for the first time
T Empty the drip tray and coffee grounds container and put
them back into the machine.
T Place a receptacle under the coffee spout.
HEATING
RINSING, the system is rinsed. Water flows out of the cof-
fee spout. The rinse stops automatically.
CAPPUCC.
appears on the display. Your D6 is ready for use.
Your D6 creates fine, creamy, feather-light milk foam with a perfect
consistency. The most important requirement for frothing milk is a
milk temperature of 4–8°C. We would therefore recommend using
a milk cooler or a milk container.
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother.
T Connect the other end of the milk pipe to a milk container
or a milk cooler.
Connecting milk
To Next Page
Loading...
