Preparing and using for the first time
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T
Never use a machine which is damaged or has a defective mains
cable.
Milk, sparkling mineral water or other liquids can damage the
water tank or the machine.
T
Only fill the water tank with fresh, cold water.
Precondition:The bean container has been filled.
T
For machines with a plug-in mains cable: Connect the mains
cable to the machine.
T
Insert the mains plug into a power socket.
T
Press the On/Off button
Q
to switch the E on.
‘Choose language’
T
Press the 0 or 9 button until the desired language is displayed,
e.g.
‘English’.
T
Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Water hardness’
E If you do not know the hardness of your water, you must
find this out first (see chapter ‘Preparing and using for the
first time – Determining the water hardness’).
T
Press the 0 or 9 button to change the setting for the water
hardness.
T
Press the ‘Save’ button.
‘Saved’
‘Filter operation’
/ ‘Insert filter’
T
Remove the water tank and rinse it with cold water.
T
Fit the filter cartridge extension supplied on top of the CLARIS
filter cartridge Smart.
T
Insert the filter cartridge with its extension into the water tank.
T
Turn the filter cartridge clockwise until it audibly clicks into
place.
T
Fill the water tank with fresh, cold water and reinsert the tank.
E The machine automatically detects that you have just
inserted the filter cartridge.
‘Saved’
‘Filter is being rinsed’
First-time use
J
WARNING
CAUTION
To Next Page
Loading...
