Jura E8 EB - Hot Water and Grinder Adjustment

 Preparation

There is a danger of scalding from hot water splashes.
T
 Avoid direct contact with the skin.
T
 Place a cup under the hot-water spout.
T
 Press the ‘Hot Water’ button.
The preset amount of water flows into the cup.
You can adjust the grinder to suit the degree of roast of your coffee.
If you adjust the consistency of grind when the grinder is not
operating, the grinder adjustment switch could be damaged.
T
 Only adjust the consistency of grind when the grinder is
running.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind
during the preparation of an espresso.
T
 Place a cup under the coffee spout.
T
 Open the cover of the filler funnel for ground coffee.
T
 Press the ‘Espresso’ button to start preparation.
T
 Turn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup.
T
 Close the filler funnel cover.
Hot water
J
CAUTION
E8
E8
Adjusting the grinder
CAUTION
max.
2X