Machine settings
Machine settings
Press the f button to enter the Cockpit. In the ‘Machine setting’ f section, you can make the
following settings:
Programme
item
Explanation
‘Choose
language’
Set language
‘Switch off after’
Set the automatic switch-off time to save energy (switch-off after minutes,
minutes or – hours after the last action on the machine)
‘Water
hardness’
Set the hardness of the water used (°dH to °dH) to prevent calcification of
your machine.
‘Units’
Set the unit for the amount of water (ml or oz)
‘Product name’
Display product images with/without product names on the start screen
‘Smart mode’
Arrange products by preparation frequency on the start screen after a certain
amount of time (the h symbol in the Cockpit shows that ‘Smart mode’ is
activated)
‘Number of
products’
Set the number of products on the start screen (two or four)
‘Factory setting’
E Restore factory settings (your E will switch off after this)
‘Rinse the milk
system’
Automatic: Milk system rinsing starts automatically minutes after prepara-
tion of a speciality coffee with milk.
Manual: The milk system rinsing can be initiated manually via the Cockpit in
the c section (see chapter ‘Maintenance – Rinsing the milk system’).
‘Version’
View software version
‘Empty system’
Empty the system to protect the E from frost during transport (see chapter
‘Transport and environmentally friendly disposal – Transport/ Emptying the
system’)
To Next Page
Loading...
