Jura E8 EB - Cleaning the Milk System

 Maintenance

T
 Place a receptacle under the fine foam frother.
T
 Press the f button.
T
 Press the c button.
T
 Press the ‘Rinse the milk system’ button to start the rinse
operation.
The fine foam frother is rinsed.
The fine foam frother must be cleaned daily if milk has been pre-
pared to make sure it functions perfectly and also in the interests of
hygiene.
If the wrong cleaning agent is used, the machine could be
damaged and/or traces could be left behind in the water.
T
 Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised
dealers.
E To clean the milk system, use the container supplied.
Precondition:The start screen is displayed.
T
 Press the f button.
T
 Press the ‘Clean the milk system’ button.
T
 Press the ‘Start’ button.
‘Clean the milk system’ / ‘Milk system cleaner’
T
 Remove the milk pipe from the milk container or milk cooler.
T
 Pour one dosing unit of milk system cleaner into the container
for milk system cleaning.
T
 Place the container under the hot-water spout and the fine
foam frother and connect the milk pipe with the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
T
 Press the ‘Next’ button.
The fine foam frother and the milk pipe are cleaned.
The operation stops automatically.
E8
E8
Cleaning the milk system
CAUTION
6
E8
E8
6