Jura E8 EB - Display Messages; Start Screen Error and Status Messages; Cockpit Indicator Messages

 Display messages

 Display messages
Messages on the start screen
Message Cause/Result Action
‘Fill water tank’
The water tank is empty. You cannot
prepare any products.
T
Fill the water tank (see chapter  ‘Daily
operation – Filling the water tank’).
‘Empty
grounds’
/
‘Empty drip
tray’
The coffee grounds container is full. /
The drip tray is full. You cannot
prepare any products.
T
Empty the coffee grounds container
and the drip tray (see chapter  ‘Daily
operation – Maintenance actions’).
‘Drip tray not
fitted’
The drip tray is not inserted correctly
or is not inserted at all. You cannot
prepare any products.
T
Fit the drip tray.
‘Fill bean
container’
The bean container is empty. You
cannot prepare any speciality coffees,
but you can prepare hot water and
milk.
T
Fill the bean container (see chapter 
‘Preparing and using for the first time –
Filling the bean container’).
‘Too hot’
The system is too hot to start a
maintenance programme.
T
Wait for several minutes until the
system has cooled or prepare a
speciality coffee or hot water.
Messages in the Cockpit
Message Cause/Result Action
The filter
symbol $
lights up red.
‘Filter’
The filter cartridge no longer
works.
T
Replace the CLARIS Smart filter cartridge
(see chapter  ‘Maintenance – Inserting/
changing the filter’).
‘Clean’
The E is prompting you to
clean it.
T
Perform cleaning (see chapter 
‘Maintenance – Cleaning the machine’).
‘Descale’
The E is prompting you to
descale it.
T
Perform descaling (see chapter 
‘Maintenance – Descaling the machine ’).
‘Clean the milk
system’
The E prompts you to clean
the milk system.
T
Perform milk system cleaning (see chapter 
‘Maintenance – Cleaning the milk system’).