Jura E80 - Dismantling and Rinsing the Fine Foam Frother

5
E8/E80/E800 – Quick Reference Guide
T Re-fit the professional fine foam frother on the milk system.
To make sure the fine foam frother works properly, and in the inter-
ests of hygiene, it must be dismantled and rinsed daily if you have
been preparing milk.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Remove the fine foam frother.
T Dismantle the fine foam frother into its individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 250ml cold water and 1 capful of JURA milk
system cleaner. Then rinse the parts thoroughly.
T Re-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation of the fine foam
frother.
Dismantling and rinsing
the fine foam frother
1
2