Jura E80 - Inserting;Changing the Filter

6
E8/E80/E800 – Quick Reference Guide
T Re-fit the fine foam frother on the milk system.
Your E8 no longer has to be descaled if you are using the CLARIS
Smart filter cartridge.
E Once the filter cartridge stops working (depending on the
water hardness setting), the E8 will prompt you to change
the filter.
E CLARIS Smart filter cartridges are available from specialised
dealers.
Precondition:The start screen is displayed.
T Remove and empty the water tank.
T Fit the filter cartridge extension supplied on top of a new
CLARIS Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘Saved’ appears briefly on the display. The machine has
automatically detected that you have just inserted/changed
the filter cartridge.
‘Filter is beingrinsed’, the water flows directly into the drip
tray.
Rinsing of the filter stops automatically. The start screen is
displayed.
Inserting/changing the
filter