12
1 Preparing and using for the first time
T Press the button that corresponds to the language you want,
e.g. ‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Water hardness’
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Press the ‘<’ or ‘>’ button to change the water hardness
setting, for example to ‘25°dH’.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter’
T Place a receptacle (at least 10 oz or 300ml) under the fine
foam frother.
T Remove the water tank and rinse it with cold water.
T Fit the filter cartridge extension supplied on top of a CLEARYL
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Filter operation’ / ‘Saved’
‘Filter is being rinsed’, the filter is rinsed. Water flows out of
the fine foam frother.
E The water may be slightly discolored. This is not harmful to
health and does not affect the taste.
‘System is filling’
‘Empty drip tray’
To Next Page
Loading...
