Jura E80 - Unit for Amount of Water; Language

27
4 Permanent settings in programming mode
Example:Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’.
T Press the ‘Pc’ button.
T Press the ‘>’ button several times until ‘4/5’ is displayed.
T Press the ‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/5’
T Press the ‘’ button to exit programming mode.
Example:Proceed as follows to change the language from ‘English’
to ‘Deutsch’.
T Press the ‘Pc’ button.
T Press the ‘>’ button several times until ‘4/5’ is displayed.
T Press the ‘Choose language’ button.
‘Choose language’
E To display more languages, press the ‘ > ’ button (bottom
right).
T Press the button that corresponds to the language you want,
e.g. ‘Deutsch’.
‘Gespeichert’ appears briefly on the display.
‘4/5’
T Press the ‘’ button to exit programming mode.
Unit for amount of water
Language