11
1 Preparing and using for the first time
pt
es
nl
en
fr
ru
en
de
E The water volume is given as standard in OZ.
You can change this setting to
ML in
programming mode (see Chapter 4 ‘Perma-
nent settings in programming mode – Unit
for amount of water’).
Precondition: The water tank and bean container
are full.
T Insert the power supply plug into a power
socket.
Q T Press the On/Off button to switch the
machine on.
LANGUAGE ENGLISH
E You can select another language by turning
the Rotary Switch.
k T Press the Rotary Switch to confirm the
language setting.
OK, the language is set.
PRESS ROTARY
T Place a receptacle under the dual spout.
k T Press the Rotary Switch.
SYSTEM FILLING
HEATING
PRESS ROTARY
k T Press the Rotary Switch to start the rinse.
RINSING, the system rinses itself,
stopping automatically.
READY
Inserting and activating the filter
Your ENA no longer has to be descaled if you are
using the CLEARYL Blue filter cartridge.
E Perform the ‘inserting the filter’ operation
without any interruptions. This will ensure
that your ENA always produces its best.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
FILTER- is
displayed.
k T Press the Rotary Switch to enter the
program item.
NO-
g T Turn the Rotary Switch until YESp is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK
INSERT FILTER
T Remove and empty the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. You can check the elapsed time by
referring to the date plate on the filter holder
in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
T Place a receptacle (at least 17 oz or 500 ml)
under the hot-water nozzle.
To Next Page
Loading...
