Jura ENA 9 One Touch - Energy Saving and Automatic Switch-Off

18
4 Permanent settings in programming mode
k T Press the Rotary Switch to enter the
program item.
NORMAL
g T Turn the Rotary Switch until STRONG is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the coffee strength is set.
FLAVOUR
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the program
item.
PRODUCT
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Energy-saving mode
The ENA can be permanently set to an energy-sav-
ing mode (Energy Save Mode, E.S.M.
©
):
U
ENERGY-
U
The ENA is constantly ready for use.
U
All specialty coffees as well as hot water can
be prepared without having to wait.
U
ENERGYp
U
Soon after the last preparation, the ENA
stops heating up. As soon as the energy-sav-
ing temperature is reached, this is indicated
in the display by the message
ENERGY
ON
– this may last several minutes. The
machine must heat back up before the next
preparation.
U
Before coffee and hot water preparation, the
machine heats up.
Example: Change the energy-saving mode from
ENERGY- to ENERGYp.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
ENERGY- is
displayed.
k T Press the Rotary Switch to enter the
program item.
ECONOMY-
g T Turn the Rotary Switch until ECONOMYp
is displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the energy-saving mode is set.
ENERGYp
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Automatic switch-off
By instructing your ENA to automatically switch
itself off, you can cut down your energy consump-
tion. If this function is activated, your ENA switches
off automatically after the preset time following
the last action on the machine.
The automatic switch-off can be set to between
15 minutes and 9 hours.
Example: Change the automatic switch-off time
from
2HRS to 1HRS.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
OFF AFTER
is displayed.
k T Press the Rotary Switch to enter the
program item.
2HRS
g T Turn the Rotary Switch until 1HRS is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the automatic switch-off time is set.
OFF AFTER