12
1 Preparing and using for the first time
First-time use without filter cartridge
activation
g T Turn the Rotary Switch until
FILTER- / NO- is displayed.
k T Press the Rotary Switch.
OK
16°dH
g T Turn the Rotary Switch to change the water
hardness setting, e.g. to
25°dH.
k T Press the Rotary Switch.
OK
FILL WATER TANK
T Remove the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
PRESS RINSE
T Place a receptacle under the dual spout.
c T Press the Maintenance button.
SYSTEM FILLING, the system fills up
with water.
HEATING
RINSING, the system rinses itself. The
operation stops automatically.
READY
To Next Page
Loading...
