Jura ENA X1 - Permanent settings in programming mode; Products; Energy Save Mode; Automatic switch-off

34
ENA X1
OK, the coffee strength is then adjusted.
AROMA
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the
programme item.
COFFEE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the
programme item.
PRODUCT
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Energy Save Mode
A default Energy Save Mode (E.S.M.
©
) setting can
be selected on the ENA:
ENERGY -
The ENA is constantly ready for use.
Coffee and hot water can be prepared
without having to wait.
ENERGY p
After approx. 5 minutes the ENA switches to
the energy-saving temperature and is not
ready for use.
Before coffee or hot water is prepared, the
machine heats up.
Example: Changing the energy-saving mode from
ENERGY p to ENERGY -.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
Press the P button P and the Maintenance
button c simultaneously until RINSE
appears.
g T Turn the Rotary Switch until ENERGY p is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ECONOMY p
g T Turn the Rotary Switch until ECONOMY -
is displayed.
Z
U
U
Z
U
U
T
T
k T Press the Rotary Switch to confirm the
setting.
OK
ENERGY -
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Automatic switch-off
You can save energy with the automatic switch-
off function on the ENA. If this function is
activated, your ENA switches off automatically
after the pre-set time following the last action on
the machine.
The automatic switch-off time can be
adjusted between 0.5 and 9 hours or
deactivated.
Example: Changing the automatic switch-off time
from 2 HRS to 1 HRS.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
Press the P button P and the Maintenance
button c simultaneously until RINSE
appears.
g T Turn the Rotary Switch until OFF AFTER
is displayed.
k T Press the Rotary Switch to enter the
programme item.
2 HRS
g T Turn the Rotary Switch until 1 HRS is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the automatic switch-off time is then
adjusted.
OFF AFTER
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
E
T
T