Jura ENA3 - Programming Mode Default Settings; Energy Saving and Auto Switch-Off

22
ENA 3
Precondition: READY appears on the display.
Open the cover behind the Rotary Switch.
P T Press the P button until MAINTENANCE
appears.
g T Turn the Rotary Switch until PRODUCT is
displayed.
k T Press the Rotary Switch to enter the
programme item.
WATER
g T Turn the Rotary Switch until AROMA is
displayed.
k T Press the Rotary Switch to enter the
programme item.
NORMAL
g T Turn the Rotary Switch until STRONG is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the coffee strength is then adjusted.
AROMA
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the
programme item.
PRODUCT
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Energy-saving mode
A default energy-saving mode (E.S.M.
©
) setting
can be selected on the ENA.
Programme item
ENERGY - / p:
ENERGY -
The ENA is then in constant stand-by mode.
All coffee products as well as hot water can
be prepared without having to wait.
ENERGY p
After approx. 5 minutes the ENA switches to
the energy-saving temperature and is not
ready for use.
T
Z
U
U
Z
U
Before coffee or hot water is prepared, the
machine heats up.
Example: Changing the energy-saving mode from
ENERGY - to ENERGY p.
Precondition:
READY appears on the display.
Open the cover behind the Rotary Switch.
P T Press the P button until MAINTENANCE
appears.
g T Turn the Rotary Switch until ENERGY -
is displayed.
k T Press the Rotary Switch to enter the
programme item.
ECONOMY -
g T Turn the Rotary Switch until ECONOMY p
is displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the energy-saving mode is then set.
ENERGY p
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Automatic switch-off
You can save energy with the automatic switch-
off function on the ENA.
The automatic switch-off time can be set to
between 0.5 and 9 hours or deactivated
(
--- HRS).
Example: Changing the automatic switch-off time
from
5 HRS to 2 HRS.
Precondition:
READY appears on the display.
Open the cover behind the Rotary Switch.
P T Press the P button until MAINTENANCE
appears.
g T Turn the Rotary Switch until OFF
AFTER
is displayed.
U
T
E
T