11
1 Preparing and using for the first time
T Fill the bean container with coffee beans and close the
aroma preservation cover.
E Before the machine is used for the first time, the permanent
water connection must be installed by a JURA service techni-
cian.
During first-time use, you can choose between
‘Quick installation’
and
‘Standard installation’.
U
‘Quick installation’: After setting the time and date, your GIGA
is ready for use.
U
‘Standard installation’: Here, you can also choose whether you
operate your GIGA with or without the CLARIS filter cartridge.
U
‘Use filter’/ ‘Active’: Here, you can set the capacity of the
external filter cartridge you are using.
U
‘Use filter’/ ‘Inactive’: Here, you can set the water hardness
of the water used. This setting influences when your GIGA
prompts you to perform descaling. If you do not know the
hardness of your water, you can find this out first (see Chap-
ter 1 ‘Preparing and using for the first time – Determining
the water hardness’).
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Precondition:The bean containers have been filled.
T Connect the mains cable to the machine.
T Insert the mains plug into a power socket.
3 T Switch on the GIGA using the power switch on the back of
the machine.
Q T Press the On/Off button to switch the GIGA on.
‘Welcome to JURA’ appears on the display. The display then
shows the languages you can choose from.
E To display more languages, press the
‘Next’ button (bottom
right).
First-time use
J
WARNING
To Next Page
Loading...
