Jura GIGA X8c - Activating Grinder Selection; Grinder Selection Preparation

21
2 Preparation
You have the option of configuring the start screen such that the
grinder selection (‘beans à la carte’) is always displayed. Before each
preparation, you can select which grinder is to be used and therefore
which coffee beans are to be used.
E If the grinder selection is activated, you can no longer set the
grinder for the individual products in programming mode (in
the
‘Product settings (2/5)’ programme item).
Example:Proceed as follows to activate ‘beans à la carte’ mode.
Precondition:
‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
 g T Turn the Rotary Switch until the programme item ‘Machine
settings (4/5)’
is displayed.
T Press the
‘Café à la carte’ button.
T Press the
‘Active’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (4/5)’
 O T Press the P button to exit programming mode.
‘Please select product:’
Example:Proceed as follows to prepare a coffee with coffee beans
from the grinder on the left.
Precondition:
‘Please select product:’ is displayed. ‘Beans à la carte’
mode is activated.
T Place a cup under the dual spout.
T Press the
‘+’ button on the left-hand side several times until
the value is set to ‘100%’.
E Press the
‘+’ button for approx. 1second; the value is directly
set to ‘100%’.
E The grinder selection remains active until the setting is
changed by you, even if the GIGA is switched off in the mean-
time.
Activating the grinder
selection
Preparation of a speciality
coffee with grinder
selection