Jura GIGA X8c - Product Settings Customization; Adjusting Product Settings

26
4 Permanent settings in programming mode
In the programme item ‘Product settings (2/5)’ you can make the
following settings:
U
‘Expert mode’
U
Set individual settings for all speciality coffees, milk and hot
water (see Chapter 4 ‘Permanent settings in programming
mode – Adjusting the product settings’).
U
Change the names of individual products (see Chapter 4
‘Permanent settings in programming mode – Renaming a
product’).
U
‘Classics’
U
Find all products stored as standard in your GIGA and pre-
pare these directly.
U
Replace the products on the start screen and in the product
selector with your favourites (see Chapter 4 ‘Permanent set-
tings in programming mode – Adding products to the start
screen’).
The following settings can be made in
‘Product settings (2/5)’ /
‘Expert mode’:
Product Coffee strength Amount More settings
Ristretto,
Espresso,
Coffee*,
Americano
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-
strong)
Amount of coffee:
25ml–290ml
Bypass amount of water
(except ‘ristretto’):
0ml–580ml
Temperature (low,
normal, high),
grinder on the left and/
or right (as%),
product name
Two ristretti,
two espressi,
two coffees
– Amount of coffee:
25ml–290ml
Bypass amount of water
(except ‘two Ristretti’):
0ml–580ml (per cup)
Temperature (low,
normal, high),
grinder on the left and/
or right (as%),
product name
Product settings
Adjusting the product
settings