Jura GIGA X8c - Energy-Saving Mode Settings

33
4 Permanent settings in programming mode
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings’
 O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings (3/5)’/ ‘Save energy’ you
can permanently set an energy-saving mode (Energy Save Mode,
E.S.M.
©
):
U
‘Save No’
U
All speciality coffees, speciality coffees with milk and hot
water can be prepared without having to wait.
U
‘Save Level1’
U
After switching on, your GIGA is only ready for use for speci-
ality coffees and hot water. Before you can prepare a special-
ity coffee with milk, the machine must heat up.
U
Soon after the last preparation, the GIGA stops heating up.
After about 5 minutes the message
‘Energy Save’ is dis-
played.
U
‘Save Level2’
U
After switching on, your GIGA is ready for use for all special-
ity coffees with and without milk, as well as hot water.
U
Soon after the last preparation, the GIGA stops heating up.
After about 5 minutes the message
‘Energy Save’ is dis-
played.
Example: Proceed as follows to change the energy-saving mode
from
‘Save No’ to ‘Save Level1’.
Precondition:
‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
 g T Turn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Save energy’ button.
‘Save energy’
T Press the ‘Save Level1’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (3/5)’
Energy-saving mode