Jura GIGA X8c - Setting Time and Date; Timer Functionality

34
4 Permanent settings in programming mode
 O T Press the P button to exit programming mode.
‘Please select product:’
You already set the time and date during first-time use. You can
change this setting.
E For the time format, you can choose between ‘24hrs’ and
‘AM/ PM’ (see Chapter 4 ‘Permanent settings in programming
mode – Units’).
Example:Proceed as follows to change the time.
Precondition:
‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
 g T Turn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Time/ date’ button.
‘Time/ date’
T Press the ‘Time’ button.
‘Time’
T Press the ‘+’ or ‘ –’ button to set the hours.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘ –’ button to set the minutes.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Time/ date’
 O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings (3/5)’/ ‘Timer’ you can set
an individual switch-on and switch-off time for every day of the
week.
E Automatic switch-on only works when the machine is switched
on at the power switch.
E For the time format, you can choose between ‘24hrs’ and
‘AM/ PM’ (see Chapter 4 ‘Permanent settings in programming
mode – Units’).
Time and date
Timer