Jura GIGA X8c - Automatic Switch-Off Timer

35
4 Permanent settings in programming mode
Example:Proceed as follows to set your GIGA to switch on and off
at a time defined by you every day of the week.
Precondition:
‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
 g T Turn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Timer’ button.
‘Timer’
T Press the ‘Monday’ button (example).
‘Monday’
T Press the ‘+’ or ‘ –’ button to set the hours (for ‘Switch
machine on’
).
T Press the
‘’ button.
T Press the
‘+’ or ‘ –’ button to set the minutes (for ‘Switch
machine on’
).
T Press the
‘’ button.
T Press the
‘+’ or ‘ –’ button to set the hours (for ‘Switch
machine off’
).
T Press the
‘’ button.
T Press the
‘+’ or ‘ –’ button to set the minutes (for ‘Switch
machine off’
).
T Press the
‘Every weekday’ button.
‘Saved’ appears briefly on the display. The switch-on and
switch-off times you just set are adopted for every day of the
week.
‘Timer’
 O T Press the P button to exit programming mode.
‘Please select product:’
By instructing your GIGA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your GIGA switches off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off time to 15minutes or 0.5–15
hours.
Automatic switch-off