Jura GIGA X8c - Restoring Factory Settings; Language Selection

37
4 Permanent settings in programming mode
In the programme item ‘Machine settings (3/5)’/ ‘Factory setting’
you can reset various settings to their factory settings:
U
‘All products’
U
The settings (amount of water, coffee strength, temperature
etc.) for all products are reset to the factory settings.
U
‘Machine’
U
All user settings are reset to factory settings. The GIGA then
switches off.
U
‘Empty system’
U
The system is emptied. Your GIGA then switches off.
Example:Proceed as follows to reset the values for all products to
the factory settings.
Precondition:
‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
 g T Turn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Factory setting’ button.
‘Factory setting’
T Press the ‘All products’ button.
‘All products’/ ‘Reset all products to the factory settings?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘Factory setting’
 O T Press the P button to exit programming mode.
‘Please select product:’
In this programme item you can set the language used by your
GIGA.
Example:Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
Precondition:
‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
 g T Turn the Rotary Switch until the programme item ‘Machine
settings (4/5)’
is displayed.
T Press the
‘Choose language’ button.
‘Choose language’
Restore factory settings
Language