Jura GIGA X8c - Display Settings; Customizing Display Background

38
4 Permanent settings in programming mode
E To display more languages, press the ‘Next’ button (bottom
right).
T Press the
‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen (4/5)’
 O T Press the P button to exit programming mode.
‘Bitte wählen Sie Ihr Produkt:’
In the programme item ‘Machine settings (4/5)’/ ‘Display’ you can
make the following settings:
U
‘Brightness’ (as percentages)
U
‘Contrast’ (high, normal, low)
U
‘Backlight’ (backlighting; as percentages)
Example:Proceed as follows to change the brightness of the display.
Precondition:
‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
 g T Turn the Rotary Switch until the programme item ‘Machine
settings (4/5)’
is displayed.
T Press the
‘Display’ button.
‘Display’
T Press the ‘Brightness’ button.
T Press the
‘+’ or ‘ –’ button to change the setting.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Display’
 O T Press the P button to exit programming mode.
‘Please select product:’
In this programme item you can set the background for the display
of your GIGA.
E The set background is only displayed on the start screen.
Precondition:
‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
 g T Turn the Rotary Switch until the programme item ‘Machine
settings (4/5)’
is displayed.
Display settings
Background