Jura GIGA X8c - Querying Machine Information

39
4 Permanent settings in programming mode
T Press the ‘Colour scheme’ button.
‘Colour scheme’
T Press the ‘+’ or ‘ –’ button to change the setting.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (4/5)’
 O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Information (5/5)’ you can view the follow-
ing information:
U
‘Product counter’: Number of prepared coffee speciality cof-
fees, speciality coffees with milk and hot water
U
‘Day counter’: Number of prepared coffee speciality coffees,
speciality coffees with milk and hot water. This counter can be
reset to zero.
U
‘Maintenance counter’: Number of maintenance programmes
performed (cleaning, descaling etc.)
U
‘Version’: Software version
Precondition:
‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
 g T Turn the Rotary Switch until the programme item ‘Informa-
tion (5/5)’
is displayed.
T Press the
‘Product counter’ button.
‘Total cups’
E You can also view the number of products prepared in the
product selector. To do this, turn the Rotary Switch.
T Press any button or the Rotary Switch to exit the programme
item.
‘Information (5/5)’
 O T Press the P button to exit programming mode.
‘Please select product:’
Querying information